Capture Card Setup

Wiring | Configuration 

Capture cards are simple to configure but it can sometimes be difficult to determine the proper settings. Any DirectShow compatible video source is capable of being connected to Visual Casino.

 

Wiring

There are two possible ways to wire the capture card to the output of your surveillance video system. One option is to use an unused video output from your surveillance PC to send to the video capture card. The second option is to split the signal going to one of your monitors to send to the video capture card.

We recommend digital signals as they tend to be higher resolution which are better for facial recognition.

 

Configuration

Configure your capture card according to the specifications of the card. The information populated is retrieved directly from the capture card and may not necessarily make a lot of sense. 

  1. Log in to Visual Casino with the ability to search CID or SIN
  2. Select Search
  3. Select Add Facial Recognition Image
  4. From the top menu, select Capture Configuration (rightmost menu item)
  5. Enter the proper capture card configuration.

The most likely option to vary for any card in this set of options is the Output Size. It will conform to whatever output resolution you configured for the monitor that you are mirroring to this output. In some cases Visual Casino may need to be Run as Administrator in order to persist the video capture settings following a reboot.

 

Blackmagicdesign DeckLink Mini recorder

Note 1: This card requires a 64 Bit OS.

Note 2: In order to set up this card for digital capture, be sure to use the included capture card software and activate the proper capture channel, this card will not work if the capture channel is not set to digital (see below for instructions).

Minimum Requirements

  • Operating System: Windows 10 64-Bit

Configuration

Blackmagicdesign DeckLink Mini recorder PCI Drivers should come with driver software new versions of Desktop Video can be found at: https://www.blackmagicdesign.com/support/download/d389b26e8e54407482a8bddd27bf884a/Windows

Following the installation of the application software provided with the capture card:

  1. Select Start Menu > Blackmagic Design > Desktop Video Setup
  2. Below the image of the card choose the circular button
  3. Select HDMI
  4. Click Save

Table 1: Blackmagicdesign DeckLink Mini recorder Capture Configuration

Name Value
Capture Device Unknown - Blackmagic WDM Capture
Video Standard  
Color Space Compression      Unknown - 30
Output Size 1920x1080
Frame Rate 29.97
Crossbar Input  

 

Table 2: Blackmagicdesign DeckLink Mini recorder Video Amp Proc Configuration

Name Value
Override Video Mode      Checked
Display Mode Auto

 

MiraBox USB 3.0 Capture Card

There are no additional drivers to download and install for the MiraBox USB 3.0 Capture Card.

Configuration

Table 3: Blackmagicdesign DeckLink Mini recorder Capture Configuration

Name Value
Capture Device Unknown - MiraBox Video Capture
Video Standard  
Color Space Compression      YUY2
Output Size 1920x1080
Frame Rate 30
Crossbar Input  

 

Hornettek 1080p/60fps HDMI to USB3

Hornettek 1080p/60fps HDMI to USB3 driver can be found at: http://www.hornettek.com/video-audio-products/hdmi-video-capture/hornettek-1080p-60fps-hdmi-to-usb-3-0-video-game-capture-device-ht-vc01.html

Table 4: Hornettek 1080p/60fps HDMI to USB3 Capture Configuration

Name Value
Capture Device Unknown - USB Video Device
Video Standard  
Color Space Compression      YUY2
Output Size 1920x1080
Frame Rate 60.00
Crossbar Input  

 

Euresys PICOLO sn/72062 PCIe

The Euresys PICOLO sn/72062 drivers can be found at: https://www.euresys.com/en/Support/Download-area?series=84a7f830-2a4d-4360-9c13-c2e1859f9511&os=Windows

Table 5: Euresys PICOLO sn/72062 Capture Configuration

Name Value
Capture Device Unknown - Euresys PICOLO sn/72062 - YC
Video Standard NTSC_M
Color Space Compression      YUY2
Output Size 640x480
Frame Rate 29.97
Crossbar Input VID1